Yealink SIP-T2XP Administration Guide

Administrator’s Guide for SIP-T2xP IP Phones
64
Variable
Phone Action
key=Reboot
Reboot the phone.
key=AutoP
Let the phone do auto provisioning.
key=DNDOn
Activate the DND mode.
key=DNDOff
Deactivate the DND mode.
Note
For security reasons, the IP phone does not receive and handle the HTTP GET request by
default. You need to specify which IP address may send the URI to the IP phone. When
receiving the HTTP GET request from the specified IP address, the phone LCD screen
prompts the message ―Allow Remote Control?‖. You can specify one or more trusted IP
addresses on the IP phone, multiple IP addresses are separated by comma. You can
also configure the IP phone to receive and handle the URI from any IP address.
Procedure
Specify the trusted IP address for Action URI using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
For more information, refer to
Action URI on page 151.
Local
Web User Interface
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=6
To configure the trusted IP address(es) for Action URI via web user interface:
1. Click on Phone->Features->API Security>>.
2. Enter the IP address in the Trusted Action URI Server List field.
Multiple IP addresses are separated by comma.
3. Click Confirm to save the change.
The variable does not work with all events. For example, the variable ―key=MUTE‖ is
only applicable when the IP phone is during a call.

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English