To change the administrator password via web user interface:
1. Click on Security.
2. Mark the admin radio box.
3. Enter the current administrator password in the Current Password field.
4. Enter a new password in the New Password and Confirm Password fields.
5. Click Confirm to save the change.
A user or administrator can lock the IP phone to prevent it from unauthorized use. Once
the IP phone is locked, the user or administrator needs to enter the password to unlock
the phone. The default unlock password is ―123‖. You can change the unlock password
and configure the interval to automatically lock the phone. The phone supports numeric
characters only in unlock passwords. The maximum length of the password is 15
characters. You can configure a DSS key to be keypad lock key. After enabling the
phone lock feature, the phone is locked after a configured period of inactivity. You can
long press the pound key or press the keypad lock key on the idle screen to lock the
phone immediately. You are only allowed to dial out the emergency numbers when the
phone is locked. You can specify one or more emergency numbers for the IP phone.
There are four types of "locks" that can apply to the IP phone:
Menu Key: The Menu key is locked. You cannot access the menu of the IP phone
until unlocked.
Function Keys: The function keys are locked.
All Keys: All keys are locked except the Volume key. The IP phone can only dial out
emergency numbers and answer incoming calls by lifting the handset, pressing the
Speakerphone key, pressing the HEADSET key or pressing the OK key.
Lock&Answer: All keys are locked, except the Menu key, the HEADSET key and the
Volume key. The IP phone can automatically answer the incoming calls and place
the previous conversation (if one) on hold, but cannot end the call.
To Next Page
Loading...
Need help?
General