Configuring Advanced Features
73
Firmware Image
Configuration File
This method is used by an ACS to cause the CPE to
upload a specified file to the designated location.
File type supported by the Yealink IP phones are:
Configuration File
Log File
This method is used by an ACS to request the CPE to
schedule a one-time Inform method call (separate
from its periodic Inform method calls) sometime in the
future.
This method resets the CPE to its factory default state,
and calls for use with extreme caution.
This method informs the ACS of the completion (either
successful or unsuccessful) of a file transfer initiated by
an earlier Download or Upload method call.
This method is used to add a new instance of an object
defined on the CPE.
This method is used to remove a particular instance of
an object.
Procedure
TR-069 can be configured using the configuration files or locally.
Configure theTR-069 feature.
For more information, refer to
TR-069 on page 156.
Configure the TR-069 feature.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=25
To configure the TR-069 via web user interface:
1. Click on Upgrade->TR069.
2. Select Enabled from the pull-down list of Enable TR069.
3. Enter the username and password authenticated by the ACS in the ACS Username
and ACS Password fields.
4. Enter the URL of the ACS in the ACS URL field.
To Next Page
Loading...
Need help?
General