To Next Page

To Previous Page

Resource Files

When configuring some features, you may need to upload resource files to the IP phone.

The resources files can be local contact directory, remote phonebook and so on. If the

resource file is to be used for a system of IP phones, the access URL of the resource file is

best specified in the <y000000000000>.cfg file. However, if you want to specify the

desired phone to use the resource file, the access URL of the resource file is best

specified in the <MAC>.cfg file.

This chapter will provide the detailed information on how to work with the following

resource files and specify the access URL:

 Replace Rule Template

 Dial-now Template

 Local Contact File

 Remote XML Phonebook

 Specifying the Access URL of Resource Files

You can create multiple replace rules using the replace rule template. After creating the

replace rule template, save the replace rule template to the root directory of the

configuration server and specify the access URL in the configuration files.

When creating a replace rule template, remember the following:

 A replace rule template must be in .xml format.

 <DialRule> indicates the start of a template and </DialRule> indicates the end of

a template.

 At most 20 replace rules can be added to the IP phone.

 The expression syntax in the replace rule template is the same as introduced in the

section Creating Dial Plan on page 21.

 Specify the values within double quotes.

 When specifying the desired line(s) for the replace rule, the valid values are 0 and

line ID. 0 stands for all lines, multiple line IDs are separated by comma.

 The file name must be dialplan.xml.

Procedure

Use the following procedures to create a replace rule template.

Yealink SIP-T2XP Administration Guide

Other manuals for Yealink SIP-T2XP