User Guide for the VC120 Video Conferencing System
112
5. Press (More soft key).
6. Press or to scroll to Camera Preset, and then press .
7. Long press any number key (0-9) on the remote control, far-end camera position and focus
are stored to the numeric key.
8. Press (Exit soft key).
Moving Far-end Camera to a Preset Position
To move the far-end camera to a preset position during a call:
1. Press (More soft key) during an active call.
2. Press or to scroll to Near/Far Camera, and then press .
3. Select the remote video, and then press .
4. Press (More soft key).
5. Press or to scroll to Camera Preset, and then press .
6. Press the numeric key that is already associated with a preset.
The far-end camera will adjust to the preset.
7. Press (Exit soft key).
Clearing the Local Camera Presets
To clear the stored local camera presets via remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Video & Audio menu.
3. Press or to scroll to Camera General Settings, and then press .
4. Press or to scroll to Clear Preset Position, and then press .
5. Select Ok, and then press to delete all presets.
Video Recording
When the system is idle, you can record local video via the remote control. During a call, the
video and presentation which are shown on the display device can be recorded via the remote
control and video conferencing phone.
To Next Page
Loading...
Need help?
General
