Zebra TC700K User Manual

DataWedge 4 - 37
2. Select Delete action from the context menu.
ADF Example
The following illustrates an example of creating Advanced Data Formatting:
When a user scans a bar code with the following criteria:
• Code 39 bar code.
• length of 12 characters.
• contains 129 at the start position.
Modify the data as follows:
• Pad all sends with zeros to length 8.
• send all data up to character X.
• send a space character.
To create an ADF rule for the above example:
1. Touch > .
2. Touch Profile0.
3. Under Keystroke Output, touch Advanced data formatting.
4. Touch Enable.
5. Touch Rule0.
6. Touch Criteria.
7. Touch String to check for.
8. In the Enter the string to check for text box, enter 129 and then touch OK.
9. Touch String position.
10. Change the value to 0.
11. Touch OK.
12. Touch String length.
13. Change value to 12.
14. Touch OK.
15. Touch Source criteria.
16. Touch Barcode input.
17. Touch All decoders enabled to disable all decoders.
18. Touch Code 39.
19. Touch three times.
20. Touch Actions.
21. Touch and hold on the Send remaining rule until a menu appears.
22. Touch Delete action.
23. Touch .
24. Touch New action.
25. Select Pad with zeros.

Zebra TC700K Specifications

General

Display	4.7-inch HD (1280 x 720) capacitive touchscreen
Storage	8 GB Flash
Operating System	Android
Camera	8 MP auto-focus with flash
Connectivity	Wi-Fi 802.11 a/b/g/n
Data Capture	Imager
Operating Temperature	-20° C to 50° C
Touch Panel	Capacitive
Expansion Slot	microSD slot

Summary

About This Guide

Introduction to the Guide

General introduction to the guide's purpose and scope.

Software Versions

Information on how to check the device's current software versions.

Notational Conventions

Explanation of conventions used throughout the document.

Service Information

Contacting Customer Support

Procedures and information needed for contacting Zebra support.

Chapter 1: Getting Started

Setup Procedure

Initial steps to set up the device for first use.

Installing the Battery

Detailed steps for inserting and securing the battery.

Charging the Battery

Instructions on how to charge the device's battery.

Resetting the Device

Overview of device reset options and procedures.

Chapter 2: Accessories

Accessories Overview

Lists available accessories with part numbers and descriptions.

2-Slot USB/Ethernet Cradle

Details and setup for the 2-slot USB/Ethernet cradle.

4-Slot Battery Charger

Details and setup for the 4-slot battery charger.

Chapter 3: USB Communication

Connecting to a Host Computer via USB

How to connect the device to a host computer via USB.

Transferring Files using Media Transfer Protocol

Steps to transfer files using MTP.

Chapter 4: DataWedge

Basic Scanning

Instructions for capturing barcode data using the device.

Profiles

Explanation of DataWedge profiles and their configurations.

Bar Code Input

Configuration options for barcode input settings.

Chapter 5: Settings

WLAN Configuration

Steps to set up and configure Wi-Fi networks.

Screen Unlock Settings

Preferences for locking and unlocking the device screen.

Button Remapping

How to reprogram device buttons for different functions.

Chapter 6: Application Deployment

ADB USB Setup

Instructions for setting up ADB for device connection.

Application Installation

Methods for installing applications onto the device.

Performing a Factory Reset

Procedures for performing a factory reset on the device.

Chapter 7: Maintenance and Troubleshooting

Maintaining the TC70x/TC75x

Tips for proper device care and upkeep.

Battery Safety Guidelines

Important guidelines for safe battery use and charging.

Troubleshooting

Common problems and their solutions.

Appendix A: Technical Specifications

TC70x/TC75x Technical Specifications

Detailed technical specifications for the TC70x/TC75x device.

Wireless LAN Data and Voice Communications

Technical details for wireless LAN communications.

Data Capture Specifications

Specifications for the 2D Imager and Camera.