Application Deployment 6 - 13
9. Type:
adb reboot recovery
10. Press Enter. The System Recovery screen appears. See Figure 6-5 on page 6-10.
11. Press the Volume Up and Volume Down buttons to navigate to apply from adb.
12. Press the Power button.
13. On the host computer command prompt window type:
adb sideload <file>
where: <file> = the path and filename of the zip file.
14. Press Enter. The Enterprise Reset package installs and then the Recovery screen appears.
15. Press the Power button to reboot the device.
Performing a Factory Reset
A Factory Reset erases all data in the /cache, /data and /enterprise partitions in internal storage and clears
all device settings. A Factory Reset returns the device to the last installed operating system image. To revert to a
previous operating system version, re-install that operating system image. See Performing a System Update on
page 6-9 for more information.
Download the Factory Reset Package
Download the Factory Reset package:
1. Go to the Zebra Support & Downloads web site, http://www.zebra.com/support.
2. Download the appropriate Factory Reset file to a host computer.
Using microSD Card
1. Copy the Factory Reset zip file to the root of the microSD card.
• Copy the zip file to a microSD card using a host computer (see Chapter 3, USB Communication for more
information) and then installing the microSD card into the device (see Replacing the microSD Card on page
1-12 for more information).
• Connect the device with a microSD card already installed to the host computer and copy zip file to the
microSD card. See Chapter 3, USB Communication for more information. Disconnect the device from the
host computer.
2. Press and hold the Power button until the menu appears.
3. Touch Reboot.
4. Touch OK. The device resets.
5. Press and hold the PTT button until the device vibrates. The System Recovery screen appears. See Figure 6-5
on page 6-10.
6. Press the Up and Down Volume buttons to navigate to the apply update from sdcard.
7. Press the Power button.
8. Press the Up and Down Volume buttons to navigate to the Factory Reset file.
NOTE If device number does not appear, ensure that ADB drivers are installed properly.
To Next Page
Loading...
Need help?
General
