CHAPTER 1 GETTING STARTED
Introduction
This chapter provides information for getting the device up and running for the first time.
Setup
Perform this procedure to start using the TC70x/TC75x for the first time.
• Install a SIM card (TC75x only).
• Install a SAM card.
• Install a micro secure digital (SD) card (optional).
• Install hand strap (optional).
• Install the battery.
• Charge the TC70x/TC75x.
• Power on the TC70x/TC75x.
Installing the SIM Card
1. Remove access cover.
NOTE TC75x only.
CAUTION For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD
precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
NOTE The TC75x may contain one mini SIM slot and two nano SIM slots. If using a micro SIM card, a third-party SIM
adapter is required. By default, use a nano SIM card in slot 1.
To Next Page
Loading...
Need help?
General
