Zebra TC700K User Manual

4 - 54 TC70x/TC75x Integrator Guide
When activity A returns to the foreground, the app must use SwitchToProfile again to switch back to Profile A.
This would be done in the
onResume method of activity A.
Notes
Because DataWedge will automatically switch Profile when the activity is paused, Zebra recommends that this API
function be called from the onResume method of the activity.
After switching to a Profile, this unassociated Profile does not get assigned to the application/activity and is
available to be used in the future with a different app/activity.
For backward compatibility, DataWedge’s automatic Profile switching is not affected by the above API commands.
This why the commands work only with unassociated Profiles and apps.
DataWedge auto Profile switching works as follows:
Every second…
• Sets newProfileId to the associated Profile ID of the current foreground activity.
• If no associated Profile is found, sets newProfileId to the associated Profile ID of the current foreground app.
• If no associated Profile is found, sets newProfileId to the current default Profile (which MAY NOT be Profile0).
• Checks the newProfileId against the currentProfileId. If they are different:
• deactivates current Profile
• activates new Profile (newProfileId)
• sets currentProfileId = newProfileId
NOTE Use of this API changes only the runtime status of the scanner; it does not make persistent changes to the
Profile.

Zebra TC700K Specifications

General

Brand	Zebra
Model	TC700K
Category	Handhelds
Language	English