1 General information
1.1 Application
The ZAtop SM210.60B/SM210.70B is designed as a gearless elevator machine for traction sheave-
rope elevators.
Applications other than the intended use of this elevator machine are not permitted without
approval by ZIEHL-ABEGG SE.
1.2 Structure of the operating instructions
These operating instructions help you to work safely on and with the elevator machine ZAtop
SM210.60B/SM210.70B. They contain safety instructions that must be complied with as well as
information that is required for failure-free operation of the elevator machine.
The operating instructions must be stored in the vicinity of the elevator machine. It must be ensured
that all persons who have to perform activities on the elevator machine can consult the operating
instructions at any time. Instructions for use in accordance with the German Occupational Safety and
Health Act and the German Work Equipment Ordinance must be provided in addition to these
operating instructions.
Keep the operating instructions for continued use. They must be passed-on to all successive owners,
users and final customers.
1.3 Target group
The operating instructions address persons entrusted with planning, installation, commissioning and
maintenance and servicing and who have the corresponding qualifications and skills for their job.
1.4 Exclusion of liability
ZIEHL-ABEGG SE is not liable for damage due to misuse, incorrect use, improper use or as a
consequence of unauthorized repairs or modifications.
1.5 Copyright
These operating instructions contain information protected by copyright. The operating instructions
may be neither completely nor partially photocopied, reproduced, translated or put on a data medium
without prior explicit consent from ZIEHL-ABEGG SE. Infringements are liable for damages.
All rights reserved, including those that arise through patent issue or registration on a utility model.
2 Safety instructions
2.1 General
The ZIEHL-ABEGG SE elevator machine is not a ready-to-use product and may only be operated
after having been installed in machines or plants and its safety, depending on the application, has
been ensured by protective grille, barriers, constructive devices or other adequate measures (see
DIN EN ISO 13857)!
Installation, connection to the power supply and commissioning may only be performed by qualified
service personnel! The relevant regulations must be observed!
Planners, manufacturers and operators of system parts or entire systems are responsible for the
correct and safe mounting and a reliable operation.
Translation of the original operating instructions
ZAtop – model series SM210.60B/SM210.70B General information
$7%$B*% ,QGH[ Part.-No. 01013389-GB (EU-BD 1014)
5/88
Compliance with the following instructions is mandatory to ensure the functionality and safety of the
product. If the following instructions given especially but not limited for general safety, transport,
storage, mounting, operating conditions, start-up, maintenance, repair, cleaning and disposal / recy-
cling are not observed, the product may not operate safely and may cause a hazard to the life and
limb of users and third parties.
Deviations from the following requirements may therefore lead both to the loss of the statutory material
defect liability rights and to the liability of the buyer for the product that has become unsafe due to the
deviation from the specifications.
To Next Page
Loading...
Need help?
General
