Chapter 5 System Management
Confidential and Proprietary Information of ZTE CORPORATION 81
TABLE 76 ENABLE SECRET COMMAND WINDOW
Command Format
Command
Mode
Command
Function
enable secret {0
<password>|5
<password>|<password>}
Global
Config
This sets password
for privileged mode
Result: This configures privileged password in order to
confirm read/write action.
Note: In the privileged mode, a user can configure operation
parameters and also can enter the configuration mode.
4. To set Telnet username and password, use username
<username> password <password> command in global
configuration mode, as shown in
Table 77.
TABLE 77 TELNET USERNAME COMMAND WINDOW
Command
Format
Command
Mode
Command Function
username
<username>
password
<password>
Global Config
This sets Telnet user and
password
Result: This configures username and password for telnet
session.
5. To set system time, use clock set <current-time> <month>
<day> <year> command in privilged mode, as shown in
Table 78.
TABLE 78 CLOCK SET COMMAND WINDOW
Command
Format
Command
Mode
Command Function
clock set
<current-time>
<month>
<day> <year>
Exec This sets System time
Result: This configures system time.
E
ND OF STEPS
For more information about system management please refer to
below procedure.
Viewing System Information
Refer to below procedure for viewing system information of ZTE
GER.
Router Command Line Interface has been accessed.
Related
Information
Purpose
Prerequisite
To Next Page
Need help?
General
