ACH580 E-Clipse bypass and packaged drive user manual 219
Technical data
Applicable standards
E-Clipse bypass compliance with the following standards is identified by the
standards “marks” on the drive type code label.
Compliance is valid with the following provisions:
• The motor and control cables are chosen as specified in this manual.
• The installation rules of this manual are followed.
Additional ACH580-01 standards information can be located in the Technical data/
applicable standards section of the ACH580 Hardware Manual
(3AXD50000044839).
Mark Applicable Standards
UL 508A UL Standard for Industrial Control Panels
To Next Page
Loading...
Need help?
General
