ACUTRONIC fabian HFO User Manual

156 Technical specifications
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
18 Technical specifications
18.1 Ambient conditions
During operation:
• Temperature
• Air pressure
• Relative humidity
10 to 40°C (50 to 104 °F)
70 to 106 kPa
10 to 90%, non-condensing
During transportation:
• Temperature
• Air pressure
• Relative humidity
-20 to 60°C (-4 to 140 °F)
50 to 106 kPa
10 to 90%, non-condensing
During storage:
• Temperature
• Air pressure
• Relative humidity
0 to 40°C (+32°F to 104 °F)
70 to 106 kPa
20 to 80%, non-condensing
The Minimum and Maximum Ambient temperatures in the clinical area will not affect the accuracy of
the Flow, Pressure or Oxygen measurement.
18.2 Monitoring
Acoustic Pressure of Alarm tones. Alarm tone sequence according to IEC 60601-1-8:
High Priority: 52.5 to 68.6 dB(A)
Medium Priority: 52.4 to 67.9 dB(A)
Low Priority: 50.4 to 66.9 dB(A)
A weighted sound pressure level in 1m distance: 46 dB
Expiratory Minute Volume
Alarm Lower threshold Value: If Lower Alarm Limit not reached
Alarm Upper threshold Value: If Upper Alarm Limit exceeded
Airway Pressure
Alarm Lower threshold Value: If Lower Alarm Limit not reached
Alarm Upper threshold Value: If Upper Alarm Limit exceeded
maximum airway pressure: <125 mbar
Inspiratory O
2
concentration
Alarm: Set Value ±5 Vol% for >1 minute at setting of 21
Vol% below threshold Value 18 Vol%
Breath Frequency
Alarm: If Alarm Limit exceeded
Volume Monitoring
Alarm Lower Threshold Value: If the breath volume set was not supplied
Apnea Alarm
Alarm: If no breathing activity is recognized

ACUTRONIC fabian HFO Specifications

General

Brand	ACUTRONIC
Model	fabian HFO
Category	Medical Equipment
Language	English