Agilent Technologies 33120A User Manual

To Secure Against Calibration You can secure the function
generator against accidental calibration either from the front panel or
over the remote interface. The function generator is secured when
shipped from the factory and the security code is set to “HP033120”.
Be sure to read the security code rules on page 118 before attempting to
secure the function generator.
 Front-Panel Operation:
1: UNSECURED (CAL MENU)
If the function generator is unsecured, you will see the above
command when you go into the
CAL MENU. To secure the function
generator, go to the “
PARAMETER” level of the UNSECURED
command, enter the security code, and then press Enter.
When you go to the “
COMMANDS” level in the CAL MENU again,
you will notice that the function generator is secured. Notice also that
the “
CALIBRATE” command is now hidden and you cannot perform a
calibration.
 Remote Interface Operation:
CALibration:SECure:STATe {OFF|ON},<
code>
To secure the function generator, send the above command with the
same code as used to unsecure calibration. For example,
"CAL:SEC:STAT ON,HP033120"
¾000000:CODE
1: SECURED
Chapter 3 Features and Functions
Calibration Overview
120

Agilent Technologies 33120A Specifications

General

Brand	Agilent Technologies
Model	33120A
Category	Inverter
Language	English