Agilent Technologies 33120A User Manual

Messages Displayed During Menu Use
TOP OF MENU You pressed while on the “MENUS” level; this is the top level of the
menu and you cannot go any higher.
To turn off the menu, press . To move across the choices
on a level, press or . To move down a level, press .
MENUS You are on the “MENUS” level. Press or to view the choices.
COMMANDS You are on the “COMMANDS” level. Press or to view the command
choices within the selected menu group.
PARAMETER You are on the “PARAMETER” level. Press or to view and edit the
parameter for the selected command.
MENU BOTTOM You pressed while on the “PARAMETER” level; this is the bottom
level of the menu and you cannot go any lower.
To turn off the menu, press . To move up a level, press .
ENTERED The change made on the “PARAMETER” level is saved. This is displayed after
you press (Menu Enter) to execute the command.
MIN VALUE The value you specified on the “PARAMETER” level is too small for the
selected command. The minimum value allowed is displayed for you to edit.
MAX VALUE The value you specified on the “PARAMETER” level is too large for the
selected command. The maximum value allowed is displayed for you to edit.
EXITING You will see this message if you turn off the menu by pressing
or . You did not edit any values on the
“PARAMETER” level and changes were NOT saved.
NOT ENTERED You will see this message if you turn off the menu by pressing
or . You did some editing of parameters but the
changes were
NOT saved. Press the key (Menu Enter) to save changes
made on the “
PARAMETER” level.
¾
Shift
<
Menu On/Off
>
¿
<
>
<
>
<
>
¿
Shift
Menu On/Off
Enter
¾
Shift
Menu On/Off
Enter
Shift
Menu On/Off Shift Cancel
Shift Cancel
Chapter 2 Front-Panel Menu Operation
A front-panel menu tutorial
34

Agilent Technologies 33120A Specifications

General

Brand	Agilent Technologies
Model	33120A
Category	Inverter
Language	English