Allen-Bradley POINT I/O User Manual

9 Publication 1734-UM014A-EN-P - November 2010
Chapter 2
Install Your Adapter
Overview
This chapter describes how to physically install the I/O adapters and connect
it to the EtherNet/IP network.
This table lists where to find specific information.
Identify Adapter
Components
Use the figure to identify the external features of your I/O adapters.
Topic Page
Identify Adapter Components 9
Mount the I/O Adapter 10
Mount the POINT I/O Adapter on a DIN Rail 11
Mount the ArmorPOINT I/O Adapter and Base on a Wall or Panel 11
Install the POINT I/O Adapter Module 13
Install the ArmorPOINT I/O Adapter Module 13
Wire the POINT I/O Adapter 14
Wire the ArmorPOINT I/O Adapter 14
ATTENTION
You must use series C POINT I/O modules with the adapter.
Series A or B POINT I/O modules will not work with the adapter.

Allen-Bradley POINT I/O Specifications

General

Brand	Allen-Bradley
Model	POINT I/O
Category	I/O Systems
Language	English