Allen-Bradley POINT I/O User Manual

i Publication 1734-UM014A-EN-P - November 2010
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• conventions used in this manual
Who Should Use this
Manual
Use this manual if you are responsible for designing, installing, programming,
or troubleshooting control systems that use an EtherNet/IP control system
that communicates with POINT I/O or ArmorPOINT I/O modules through
a 1734-AENTR or 1738-AENTR adapter.
You should have a good understanding of Ethernet networks and the TCP/IP
protocol. If you do not, obtain the proper training before using this product.
Where to Find More
Information
Refer to the following Rockwell publications as needed for additional help
when setting up and using your EtherNet/IP network. These and other
product publications are available online at:
http://literature.rockwellautomation.com
.
ATTENTION
You must use series C POINT I/O modules with the adapter.
Series A or B POINT I/O modules will not work with the adapter
.
For Information About See This Publication Publication Number
Using EtherNet/IP for industrial control EtherNet/IP Performance and Application Guide ENET-AP001
ControlLogix Ethernet communication
interface modules
ControlLogix EtherNet/IP Bridge Module Installation Instructions 1756-IN019
EtherNet/IP Modules in Logix5000 Control Systems User Manual ENET-UM001
ControlLogix chassis ControlLogix Chassis Installation Instructions 1756-IN080
ControlLogix power supplies ControlLogix Power Supplies Installation Instructions 1756-IN613
ControlLogix system ControlLogix System User Manual 1756-UM001
RSLogix 5000 programming software Getting Results with RSLogix 5000 LG5000-GR001
RSLinx RSLinx Classic Getting Results Guide LINX-GR001
1734-AENTR adapter POINT I/O 2 Port EtherNet/IP Adapter Installation Instructions 1734-IN040
1738-AENTR adapter ArmorPOINT I/O 2 EtherNet/IP Adapter Installation Instructions 1738-IN028
Installing an EtherNet/IP network EtherNet/IP Media Planning and Installation Manual (ODVA)

Allen-Bradley POINT I/O Specifications

General

Brand	Allen-Bradley
Model	POINT I/O
Category	I/O Systems
Language	English