Publication 1734-UM014A-EN-P - November 2010
Adapter Web Dialogs 91
1. From the Home page, click Configuration or Expand to see the
Configuration options, if needed.
2. From the Configuration page, click one of the following:
•Identity
•Network
•Services
A login dialog opens as shown. The dialog may vary in appearance
depending on your operating system and browser.
3. From the user name and password dialog, enter values, noting the
following:
• The values for user name and password are case sensitive.
• The default user name is admin.
• The default password is "password".
4. Click OK to log in. After you log in, you can go to any of the
Configuration pages without having to log in again.
5. Refer to the section of this manual that corresponds to the section you
clicked:
•Identity
• Network Configuration
•Services
Use the Identity Page
To use the Identity page to make entries for the host name, module
description, module location, and chassis size, use this procedure.
To Next Page
Loading...
Need help?
General
