Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013 51
Using the HIM Chapter 4
Deleting CopyCat Files
1. Access the Status screen (see Figure 6).
2. Use the or key to scroll to the Port of the device whose
parameter set you want to delete (for example, Port 00 for the host drive).
3. Press the key to display its last-viewed folder.
4. Use the or key to scroll to the MEMORY folder.
5. Use the or key to select HIM CopyCat.
6. Press the (Enter) key to display the CopyCat Files selection screen.
7. Use the or key to select Delete CopyCat File.
8. Press the (Enter) key to display the Select File To Delete pop-up box.
9. Use the or key to select the file (or all files) to delete.
10. Press the (Enter) key to display the confirmation pop-up box.
11. Press the ENTER soft key to affirm and delete the selected CopyCat file, or
press the ESC soft key to cancel.
Another pop-up box will appear to confirm that the CopyCat file was
successfully deleted.
12. Press the ENTER soft key to affirm and complete the procedure.
6WRSSHG
+]
$872
(6&
)
3RUW &RS\&DW)LOHV
&RS\&DWIURP'HYLFHWR+,0
&RS\&DWIURP+,0WR'HYLFH
'HOHWH&RS\&DW)LOH
5HQDPH&RS\&DW)LOH
6WRSSHG
+]
$872
)
6HOHFW)LOH7R'HOHWH
3RZHU)OH[&IJ
'HOHWH$OO)LOHV
(6&
To Next Page
Loading...
Need help?
General
