Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013 61
Using the HIM Chapter 4
Resolving ‘Changed’ or ‘Requires Configuration’ Conflicts
When a ‘Changed’ or ‘Requires Configuration’ conflict exists on powerup, a ‘!’
symbol precedes the port number in the Device Conflicts pop-up box.
1. Select a port device (in this example, the Encoder card) and press either
the INFO soft key to show additional information about the conflict, or
press the FIX soft key to resolve all device conflicts.
Resolving ‘Not Functioning’, ‘Not Supported’, or ‘Invalid Duplicate’
Conflicts
When a ‘Not Functioning’, ‘Not Supported’, or Invalid Duplicate’ conflict exists
on powerup, an ‘X’ symbol precedes the port number in the Device Conflicts
pop-up box.
1. Select the port preceded with an ‘X’ (in this example, Port 05) and press
the INFO soft key to show additional information about the conflict (see
example below).
2. Press the ENTER soft key to
affirm and re-display the
Device Conflicts pop-up box.
Press the ENTER soft key to affirm
and resolve all device conflicts, or
press the ESC soft key to cancel.
6WRSSHG
+]
$872
'HYLFH&RQIOLFWV
3RUW,20RGXOH9
3RUW'HYLFH1RW)RXQG
),;
)
,1)2
3RUW(QFRGHU
6WRSSHG
+]
$872
(QFRGHU
&KDQJHG
3UHY,20RGXOH9
)
Example screen when the INFO
soft key is pressed.
(17(5
6WRSSHG
+]
$872
$ERXWWRSHUPDQHQWO\
HUDVHWKHSUHYLRXV
GHYLFHVFRQILJXUDWLRQ
&RQWLQXH"
)
Example screen when the FIX
soft key is pressed.
(6&
(17(5
6WRSSHG
+]
$872
)
,1)2
'HYLFH&RQIOLFWV
3RUW(QFRGHU
3RUW'HYLFH1RW)RXQG
;3RUW1RW)XQFWLRQLQJ

Allen-Bradley PowerFlex 20-HIM-A6 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 20-HIM-A6
Category	Recording Equipment
Language	English