Rockwell Automation Publication 20A-UM001N-EN-P - July 2013 3
Summary of Changes
The information below summarizes the changes to this PowerFlex® 70 Adjustable
Frequency AC Drives User Manual since the May 2009 release.
Parameter Updates
The following parameters have been added or updated.
Additional Manual Updates
The following information has been added, removed, or updated.
Description of New or Updated Parameters Page
Parameter 007 [Output Power] 22
Parameter 054 [Maximum Voltage] 25
Parameter 427 [Torque Ref A Sel] 28
Parameter 090 [Speed Ref A Sel] 33
Parameter 096 [TB Man Ref Sel] 34
Parameter 175 [Auto Rstrt Delay] 46
Parameter 213 [Speed Ref Source] 54
Parameter 238 [Fault Config 1] 58
Parameters 361…366 [Digital Inx Sel] 68
Description of New or Updated Information Page
Removed Chapter 1, Installation/Wiring. All installation and wiring information is now in
the PowerFlex 70 Adjustable Frequency AC Drive Installation Instructions, publication
20A-IN009.
–
Removed Chapter 2, Startup Information. All startup information is now in the PowerFlex
70 Adjustable Frequency AC Drive Installation Instructions, publication 20A-IN009.
–
Updated the Catalog Number Explanation options 11
Updates and additions to fault descriptions:
Cntl Bd Overtemp (55) 79
DB Resistance (69) 79
Encoder Quad Err (90) 79
Hardware Fault (93) 79
Fatal Faults (900…930) 80
Ground Fault (13) 80
Heatsink LowTemp (10) 80
Output PhaseLoss (21) 80
Power Down Csum (112) 81
Power Unit (70) 81
Fault Cross Reference 82
Updated EPRI/SEMIF 47 certification 89
Added information for Korean KC Registration certification 89
Added information for Drive to motor power ratio 91
Updated information for Motor overload protection 92
Added footnote 2 for information regarding watts loss with certain drives 93
Removed dimensions and fuse/breaker information. All dimensions and fuse/breaker
information is now in the PowerFlex 70 Adjustable Frequency AC Drive Installation
Instructions, publication 20A-IN009.
–
To Next Page
Loading...
Need help?
General
