Publication 1747-RM001G-EN-P - November 2008
SLC Communication Instructions 12-43
D6H Connection timed out by the network
D7H Connection refused by destination host
D8H Connection was broken
D9H Reply not received before user-specified timeout
DAH No network buffer space available
DBH Multi-hop messaging CIP message format error
DFH MSG has no IP address configured for network
E1H Target Node responded with: Illegal Address Format, a field has an illegal value.
E2H Target Node responded with: Illegal Address format, not enough fields specified.
E3H Target Node responded with: Illegal Address format, too many fields specified.
E4H Target Node responded with: Illegal Address, symbol not found.
E5H Target Node responded with: Illegal Address Format, symbol is 0 or greater than the maximum number of characters
support by this device.
E6H Target Node responded with: Illegal Address, address does not exist, or does not point to something usable by this
command.
E7H Target node cannot respond because length requested is too large.
E8H Target Node responded with: Cannot complete request, situation changed (file size, for example) during multi-packet
operation.
E9H Target Node responded with: Data or file is too large. Memory unavailable.
EAH Target Node responded with: Request is too large; transaction size plus word address is too large.
EBH Target node cannot respond because target node denies access.
ECH Target node cannot respond because requested function is currently unavailable.
EDH Target Node responded with: Resource is already available; condition already exists.
EEH Target Node responded with: Command cannot be executed.
EFH Target Node responded with: Overflow; histogram overflow.
F0H Target Node responded with: No access
F1H Local processor detects illegal target file type.
F2H Target Node responded with: Invalid parameter; invalid data in search or command block.
F3H Target Node responded with: Address reference exists to deleted area.
F4H Target Node responded with: Command execution failure for unknown reason; PLC-3 histogram overflow.
F5H Target Node responded with: Data conversion error.
F6H Target Node responded with: The scanner is not able to communicate with a 1771 rack adapter.
F7H Target Node responded with: The adapter is not able to communicate with a module.
F8H Target Node responded with: The 1771 module response was not valid - size, checksum, etc.
F9H Target Node responded with: Duplicated Label.
FAH Target node cannot respond because another node is file owner (has sole file access).
FBH Target node cannot respond because another node is program owner (has sole access to all files).
Table 12.17 MSG Instruction Error Codes (Continued)
Error Code Description of Error Condition
To Next Page
Loading...
Need help?
General
