Allen-Bradley SLC 500 Series User Manual

Publication 1747-RM001G-EN-P - November 2008
13-12 SLC Communication Channels
Configuring Channel 1 for DH+
To configure an SLC 5/04 processor channel for DH+, do the following using
your programming software.
To bring up the Channel Configuration
interface, double-click on the Channel
Configuration icon.
Define the location of the diagnostic
file used for Channel Status here. See
Table 13.5 on page 13-15 for diagnostic
file details.

Allen-Bradley SLC 500 Series Specifications

General

Brand	Allen-Bradley
Model	SLC 500 Series
Category	Controller
Language	English