APRILIA TUONO V4 R 2010 User Manual

•
Remove the flywheel cover.
•
Block flywheel rotation using the spe-
cific tool.
•
Unscrew and remove the screw.
Specific tooling
020848Y Flywheel retainer
•
Remove the tool for blocking flywheel
rotation.
•
Insert a TCEI M10x20 screw into the
crankshaft hole, which will act as a
mounting base for flywheel extraction.
•
Remove the flywheel using the specific
extractor.
•
Collect the TCEI M10x20 screw.
Specific tooling
020847Y Flywheel extractor
See also
Removing the flywheel cover
Inspecting the cover components
•
Unscrew and remove the three Blow-
by system fitting screws.
•
Remove the Blow-by system fitting.
•
Replace the O-ring with a new one of
the same type
TUONO V4 R Engine
ENG - 253

APRILIA TUONO V4 R 2010 Specifications

General

Brand	APRILIA
Model	TUONO V4 R 2010
Category	Motorcycle
Language	English