•
Spread a thin layer of oil on the sealing ring of the new engine oil filter.
•
Insert and screw the new engine oil filter in the seat, filling the filter to 1/3 of its capacity with
engine oil before fitting.
See also
Replacement
Air filter
•
Remove the fuel tank.
•
Unscrew and remove the eight air filter
box cover screws
•
Fit a suitably sized shim behind the fil-
ter box cover.
•
Lift the filter box cover on which the
control unit is installed.
•
Do not rotate the cover excessively to
avoid straining the pipes and cables.
•
Plug the intake duct opening with clean
paper
See also
Fuel tank
•
Unscrew and remove the three air filter
screws.
•
Remove the filter and replace it with a
new component of the same type.
Maintenance TUONO V4 R
MAIN - 64
To Next Page
Loading...
Need help?
General
