SIDE STAND
pos. Description Type Quantity Torque Notes
1 Screws fastening the stand to the
chassis
M10 2 45 Nm (33.19 lbf ft) Loct. 243
2 Linear switch retainer M5 2 4 Nm (2.95 lbf ft) -
- Rear stand bushing fastening screws M6 2 7 Nm (5.16 lbf ft) -
Side stand
•
Remove the clamp.
•
Disconnect the stand connector.
•
Unscrew and remove the two screws.
Chassis TUONO V4 R
CHAS - 410