WATER PUMP
pos.
Description Type Quantity Torque Notes
1 Screws fastening the pump to the
crankcase
M6x25 2 10 Nm (7.37 lbf ft) -
2 Water pump locking screw M6x35 2 10 Nm (7.37 lbf ft) -
3 Tank to pump fixing nut Flanged M6 2 12 Nm (8.85 lbf ft) -
Recommended products chart
RECOMMENDED PRODUCTS TABLE
Product
Description Specifications
ENI i-RIDE PG RACING 5W-40 Engine oil Use branded oils with performance
equivalent to or exceeding ACEA A3 -
API SL - JASO MA - JASO MA2
AGIP MP GREASE Grease for bearings, joints, couplings
and leverages
As an alternative to the recommended
product, use top brand grease for roller
bearings with an operating temperature
range of -30°C...+140°C (-22°F...+284°
F), a drop point of 150°C...230°C (302°
F...446°F), high corrosion protection
qualities and good water and rust resist-
ance.
AGIP PERMANENT SPEZIAL Coolant Ready for use mixed biodegradable cool-
ant with "long life" technology and char-
acteristics (red). Freezing protection up to
-40°C. Compliant with CUNA 956-16
standard.
AGIP BRAKE 4 Brake fluid As an alternative to the recommended
fluid, other fluids that meet or exceed the
required specifications may be used.
SAE J1703, NHTSA 116 DOT 4, ISO
4925 Synthetic fluid
AGIP ARNICA SA 32 (Sachs) Fork oil (R) SAE 0W - ISO VG 32
Characteristics TUONO V4 R
CHAR - 50
To Next Page
Loading...
Need help?
General
