Brother HL-1200 Service Manual

1-17
Confidential
4.1.2 Paper becomes wrinkled
4.1.3 Paper is curled
<User Check>
- Check that the paper is set in the paper tray correctly.
- Flip over the paper in the paper tray or rotate the paper 180 degrees.
- Adjust the paper guide according to the paper size.
- Check that the thickness of the paper is within the standard.
- Check that the paper is not damp.
- Check that there is no dust on the fuser unit.
- Check whether the paper type is appropriate.
Step Cause Remedy
1 Fuser unit failure Replace the fuser unit.
<User Check>
- Select “Reduce Paper curl mode” in the driver.
- Check that the thickness of the paper is within the standard.

Brother HL-1200 Specifications

General

Print Technology	Laser
Interface	USB 2.0
Memory	1 MB
Weight	4.6 kg
Print Speed	20 ppm
Resolution	Up to 2400 x 600 dpi
Paper Input Capacity	150 sheets
Dimensions	340 mm x 238 mm x 189 mm
Supported Operating Systems	Windows, Mac OS