Maintenance
10-2
Cleaning the Machine
Note the following before cleaning your
machine:
Make sure no document is stored in
memory, then turn off the main power
switch and disconnect the power cord.
Use a soft cloth to avoid scratching the
components.
Do not use tissue paper, paper towels,
or similar materials for cleaning; they
can stick to the components or generate
static charges.
Never use volatile liquids such as thinners, benzene,
acetone, or any other chemical cleaner to clean
the machine. These can damage the machine
components.
Any data stored in the memory, including received
fax documents, will be deleted about 60 minutes
after you turn off the main power switch or unplug
the power cord.
–
–
–
–
–
Exterior
1 Turn off the main power switch
and disconnect the power cord.
2 Wipe the machine's exterior
with a clean, soft, lint-free cloth
dampened with water or diluted
dishwashing detergent solution.
3 Wait for the machine to dry, then
reconnect the power cord and turn
on the main power switch.
To Next Page
Loading...
Need help?
General