Maintenance
10-12
Replacing the Toner Cartridge
When the LCD displays <TONER LOW/
PREPARE NEW TONER>, redistribute
toner in the toner cartridge. If the
message persists, replace the toner
cartridge.
When toner empty error occurs while
receiving fax, printing fax is interrupted
and the received data will be stored
in the memory. If you set <CONT.
PRINTING> in <PRINTER SETTINGS> in
<FAX SETTINGS> to <KEEP PRINTING>,
you can keep printing fax documents
or reports without replacing the toner
cartridge.
The default setting for <CONT.
PRINTING> is <RX TO MEMORY>. (See
“CONT. PRINTING,” on p. 12-17.)
When <CONT. PRINTING> is set to <ON>, the printed
documents may be light or blurred because of lack
of toner. The data is erased when the documents are
printed out, so you can not print the same documents
again.
Redistributing Toner
1 Open the left cover.
2 Grasp the blue plastic pull tab (A)
on the toner cartridge.
To Next Page
Loading...
Need help?
General