To Next Page

To Previous Page

Machine Settings

12-12

FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)

Setting Item Description

1. RX MODE Selects the receive mode. (See “Set the Machine for Receiving

Faxes (MF6595cx/MF6595/MF6590),” in the Starter Guide.)

FaxOnly

FaxTel

AnsMode

DRPD

Manual

–

2. USER SETTINGS Specifies the basic operation settings in the fax mode.

1. UNIT TELEPHONE # Registers your fax number. (See “Set the Machine for Sending

Faxes (MF6595cx/MF6595/MF6590),” in the Starter Guide.)

2. UNIT NAME Registers your name/company name. (See “Set the Machine

for Sending Faxes (MF6595cx/MF6595/MF6590),” in the Starter

Guide.)

3. TX TERMINAL ID Sets the options for sender information.

1. PRINTING POSITION Selects where the sender information is printed in small type at

the top of each page.

OUTSIDE IMAGE

INSIDE IMAGE

–

2. TELEPHONE # MARK Prefixes your number with the abbreviations FAX or TEL in your

sender information.

FAX

TEL

–

4. SCANNING DENSITY Adjusts the scanning density for sending a fax. (1–9)(5)

5. TEL LINE TYPE Selects the telephone line type. (See “Set the Machine for

Sending Faxes (MF6595cx/MF6595/MF6590),” in the Starter

Guide.)

TOUCH TONE

ROTARY PULSE

–

Canon imageCLASS MF6540 User Manual

Other manuals for Canon imageCLASS MF6540