10-7
Maintenance
Scanning area
Keep the scanning area clean to avoid dirty
copies or faxes to be sent.
Platen glass
1 Open the ADF.
2 Clean the platen glass and the
underside of the ADF with a cloth
dampened with water. Then wipe
the area with a soft, dry cloth.
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
●
3 Close the ADF.
Be careful not to get your fingers caught.
ADF (Cleaning the ADF Manually)
If your documents have black streaks or
appear dirty after copying them using the
ADF, this may be caused by pencil lead
rubbing off the documents and onto the
roller. Clean the ADF scanning area, film,
and roller.
1 Turn off the main power switch
and disconnect the power cord.
2 Open the ADF cover.
●
To Next Page
Loading...
