3. If you are using Regular Data Acquisition, configure the Regular Data Acquisition settings.
For details of the Regular Data Acquisition settings, see Automatically Acquiring Print Job Logs at Regular In-
tervals →P.403 .
4. Specify the jobs to be listed.
For details of how to select the job logs displayed, see Switching Between Displaying Jobs on Printer and Reg-
ularly Acquired Jobs
→P.404 .
This displays the required print job logs and lists the details.
Configuring Unit Costs in Accounting Manager
Select Unit Costs in the Settings menu to open the Unit Costs dialog box. Configure the unit cost settings in this dialog
box.
Note
• When you select a job and then open the Unit Costs dialog box, items with unit costs that have not yet been
configured for that job are shown highlighted.
• Setting the Unit Cost for Ink →P.399
• Setting the Unit Cost for Paper →P.400
• Setting the Unit Cost for Items Other Than Ink and Paper →P.401
Windows Software
>
Accounting
>
Configuring Unit Costs in Accounting Manager
iPF750
3
398
To Next Page
Loading...
Need help?
General