10. Select and click a roll paper in the A Paper Source list.
11. Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, 16 in. (406.4mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Infor-
mation on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes
dialog box—in this case, ISO A4.
13. Select the D Enlarged/Reduced Printing check box.
14. Click F Fit Roll Paper Width.
15. Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Mac OS X) →P.436 "
Resizing Originals by Entering a Scaling Value
You can freely adjust the size of originals by enlarging or reducing them as desired.
•
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF750
Resizing Originals by Entering a Scaling Value
2
81
To Next Page
Loading...
Need help?
General