Messages regarding paper
MediaType Mismatch ...................................................................................................................................... 811
The paper is too small. .................................................................................................................................... 812
The paper is too small. .................................................................................................................................... 812
PaprWidth Mismatch ....................................................................................................................................... 813
Paper size not detected. ................................................................................................................................. 814
Insufficient paper for job ................................................................................................................................. 815
This paper cannot be used. ............................................................................................................................ 815
Roll printing is selected. .................................................................................................................................. 815
Roll printing is selected, but sheets are loaded. ............................................................................................ 816
The roll is empty. ............................................................................................................................................. 816
Sheet printing is selected. .............................................................................................................................. 817
Regular printing is selected, but a roll is loaded. ........................................................................................... 817
Paper jam ........................................................................................................................................................ 817
Paper is crooked. ............................................................................................................................................ 818
Paper not aligned with right guide. ................................................................................................................. 819
Cannot detect papr ......................................................................................................................................... 819
Paper cutting failed. ........................................................................................................................................ 819
End of paper feed. .......................................................................................................................................... 820
Rel lever is in wrong position. ......................................................................................................................... 820
Borderless printng not possible. ..................................................................................................................... 820
Paper position not suitable for borderless printing. ........................................................................................ 821
Roll paper is not securely in contact with roll holder. ..................................................................................... 821
MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1. Press â–² or â–¼ to select Stop Printing, and then press the OK button.
2. Either change the type of paper specified in the printer driver settings or
replace the loaded paper and change the paper type setting on the printer.
(See "Loading and Printing on Rolls.")
→P.6
(See "Loading and Printing on Sheets.") →P.9
You tried to print a test pattern for print-
er adjustment on several sheets, but
sheets of different types of paper were
used.
When printing a test pattern for adjustment, use sheets of the same type of
paper, in the required quantity. Replace the paper as follows and perform
adjustment again.
1. Press â–² or â–¼ to select Stop Printing, and then press the OK button.
2. Replace the paper.
(See "Loading and Printing on Sheets.")
→P.9
3. Execute adjustment again from the control panel menu.
Press â–² or â–¼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the printing
quality.
Error Message
>
Messages regarding paper
>
iPF750
MediaType Mismatch
12
811
To Next Page
Loading...
Need help?
General