Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, ink may be transferred onto the paper surface during ejection,
soiling it. In that case, you may be able to improve the condition by setting the time to wait for the ink to dry after printing.
Note
• If the Cutter touches the print surface on which the ink is not dry, the paper surface may become scratched or
soiled, or the paper surface may rub against the output stacker when the paper falls and the surface may be-
come soiled.
To wait for the ink to dry without allowing printed documents to fall after printing, set Cutting Mode on the
menu of the printer to Eject. (See "Specifying the Cutting Method for Rolls.") →P.594
Windows
1. Display the printer driver dialog box.
(See "Accessing the Printer Driver Dialog Box from the Operating System Menu(Windows).")
→P.218
2. Select the Main sheet and click C Advanced Settings in A Media Type.
Handling Paper
>
Handling rolls
>
Specifying the Ink Drying Time for Rolls
iPF750
5
592
To Next Page
Loading...
Need help?
General