8. In the APage Size list, click the size of the original as specified in the application. In this case, click 10"x12".
9. Select and click a roll paper in the LPaper Source list.
10. Select the BBorderless Printing check box to display the Information dialog box.
11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12. Click OK to close the Information dialog box.
13. In CBorderless Printing Method, click D Fit Paper Size.
14. Click Match Page Size in the GPaper Size list.
15. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.205 "
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
• Document: Any Type
• Page size: 10×12 inches (254.0×304.8 mm)
Enhanced Printing Options
>
Borderless Printing
>
iPF755 Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
3
101
To Next Page
Loading...
Need help?
General