*1: For information on types of paper you can use with the stacker in Extended position, refer to the Paper Reference Guide.
(See "Types of Paper.") →P.620
Options
Roll Holder Set RH2-33
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless print-
ing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
• Recommended Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes the
required margin. (See "Printing on Oversized Paper.") →P.84
Margins of Printable Area Margins of Recommended Print Area
Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
Sheets 3 mm (0.12 in) 23 mm (0.91
in)
3 mm (0.12 in) 20 mm (0.79
in)
23 mm (0.91
in)
5 mm (0.20 in)
Rolls 0/3 mm (0/0.12
in)
0/3 mm (0/0.12
in)
0/3 mm
(0/0.12 in)
20 mm (0.79
in)
5 mm (0.20 in) 5 mm (0.20 in)
Sheets
•
Printable Area
a margin of 3 mm (0.12 in) on top, 23 mm (0.91 in) on bottom, and 3 mm (0.12 in) on left and right sides is required.
•
Recommended Print Area
A margin of 20 mm (0.79 in) on top, 23 mm (0.91 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.
Printer Parts
>
Printer Specifications
>
Print Area iPF755
9
750
To Next Page
Loading...
Need help?
General