3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pages
and DBetween Scans in B Drying Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.439
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Mode
to Eject in the printer menu.
(See "Specifying the Cutting Method for Rolls.") →P.644
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit
following printer driver settings.
Media
Menu >
Paper De-
tails >
(Various
Types of
Paper) >
Cutting
Mode
Automat-
ic
Auto Cut Yes
Eject
→P.645
Choose this setting if you prefer not to have
documents dropped immediately after printing,
as when waiting for ink to dry.
To cut the roll with the Cutter Unit, press the
Cut button.
Eject Yes
Man-
ual
→P.647
Choose this setting when using media that can-
not be cut using the Cutter Unit.
Cut each page from the roll using scissors. For
continuous printing (if you will cut each page
later), select Auto Cut > Yes or select Print
Cut Guideline.
Manual No Yes
Print Cut
Guideline
Handling Paper
>
Handling rolls
>
Specifying the Cutting Method for Rolls iPF755
7
644
To Next Page
Loading...
Need help?
General