Paper is crooked.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll.
1. Push the Release Lever back.
2. Adjust the right edge of the roll to make it par-
allel to the orange Paper Alignment Line.
3. Pull the Release Lever forward.
(See "Loading Rolls in the Printer.") →P.630
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
→P.626
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on
the right.
(See "Loading Sheets in the Printer.") →P.652
Note
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-
lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.
Paper not aligned with right guide.
Cause Corrective Action
When paper was loaded, it was not aligned with the guide
on the right side.
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
Cannot detect papr
Cause
Corrective Action
The paper has come out of the printer. Follow these step to reload a sheet.
Error Message
>
Messages regarding paper
>
iPF755 Paper is crooked.
13
869
To Next Page
Loading...
Need help?
General