The remaining ink levels shown on the Display Screen correspond to the inks identified by the Color Label on the bottom of
the Display Screen.
These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if you have deactivated ink
level detection.
The remaining ink level is indicated as shown below.
If the Display Screen indicates to replace the Ink Tank, replace the Ink Tank. If a message is displayed indicating to check
the remaining ink levels, or after tasks that consume a lot of ink such as large-format printing or head cleaning, check the
remaining levels and replace Ink Tank as needed. (See "Replacing Ink Tanks.") →P.787
When to Replace Ink Tanks
Replace or prepare to replace ink tanks in the following situations.
If a message for checking the ink is shown on the Display Screen
When there is little ink left, the Message Lamp is lit and "Not much ink is left." is shown on the Display Screen. You can
continue to print, but prepare to replace the Ink Tank. (See "Checking Ink Tank Levels.") →P.792
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require a lot of
ink. In this case, replace or prepare to replace the Ink Tank before maintenance.
Maintenance
>
Ink Tanks
>
iPF755 When to Replace Ink Tanks
11
793
To Next Page
Loading...
Need help?
General