EasyManuals Logo

Cisco ASA 5540 User Manual

Cisco ASA 5540
2164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1610 background imageLoading...
Page #1610 background image
1-18
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring L2TP over IPsec
Configuring L2TP over IPsec
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
default-group-policy sales_policy
address-pool sales_addresses
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
no authentication pap
authentication chap
authentication ms-chap-v1
authentication ms-chap-v2
crypto ipsec transform-set trans esp-3des esp-sha-hmac
crypto ipsec transform-set trans mode transport
crypto dynamic-map dyno 10 set transform-set set trans
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Configuration Example for L2TP over IPsec Using ASA 8.4.1 and later
The following example shows configuration file commands that ensure ASA compatibility with a native
VPN client on any operating system:
ip local pool sales_addresses 209.165.202.129-209.165.202.158
group-policy sales_policy internal
group-policy sales_policy attributes
wins-server value 209.165.201.3 209.165.201.4
dns-server value 209.165.201.1 209.165.201.2
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
default-group-policy sales_policy
address-pool sales_addresses
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
no authentication pap
authentication chap
authentication ms-chap-v1
authentication ms-chap-v2
crypto ipsec ikev1 transform-set my-transform-set-ikev1 esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set my-transform-set-ikev1 mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set trans
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400

Table of Contents

Other manuals for Cisco ASA 5540

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASA 5540 and is the answer not in the manual?

Cisco ASA 5540 Specifications

General IconGeneral
Firewall Throughput650 Mbps
Maximum Firewall Connections400, 000
VPN Throughput225 Mbps
Maximum VPN Peers5, 000
High AvailabilityActive/Active, Active/Standby
IPSec VPN Throughput225 Mbps
Memory1 GB
IPS Throughput225 Mbps
Security Contexts50
Flash Memory64 MB
Form Factor1U
Power SupplyDual
Interfaces4 x 10/100/1000 Ethernet

Related product manuals