Cisco ASA 5540 User Manual

1-118
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Clientless SSL VPN
Translating the Language of User Messages
Changing a Group Policy or User Attributes to Use the Customization
Object
This section describes how to activate your changes for specific groups or users.
Detailed Steps
Step 6 Enter a name for thise bookmark, which will be displayed on the portal.
Step 4
import webvpn customization
Example:
hostname# import webvpn customization sales
tftp://209.165.200.225/sales
hostname# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Imports the customization template as a new object.
Step 5
show import webvpn customization
Example:
hostname# import webvpn customization sales
tftp://209.165.200.225/sales
hostname# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Shows the new customization object sales.
Command Function
Command Purpose
Step 1
webvpn
Switches to webvpn configuration mode.
Step 2
group-policy webvpn
Switches to group-policy webvpn configuration
mode.
Step 3
customization
Example:
hostname(config)# group-policy sales attributes
hostname(config-group-policy)# webvpn
hostname(config-group-webvpn)# customization value
sales
Enables the customization object.
Shows the customization object sales enabled in the
group policy sales.

Cisco ASA 5540 Specifications

General

Firewall Throughput	650 Mbps
Maximum Firewall Connections	400, 000
VPN Throughput	225 Mbps
Maximum VPN Peers	5, 000
High Availability	Active/Active, Active/Standby
IPSec VPN Throughput	225 Mbps
Memory	1 GB
IPS Throughput	225 Mbps
Security Contexts	50
Flash Memory	64 MB
Form Factor	1U
Power Supply	Dual
Interfaces	4 x 10/100/1000 Ethernet