Cisco ASA 5540 User Manual

1-7
Cisco ASA Series CLI Configuration Guide
Chapter 1 Adding a Webtype Access Control List
Feature History for Webtype Access Lists
Feature History for Webtype Access Lists
Table 1-2 lists the release history for this feature.
Table 1-2 Feature History for Webtype Access Lists
Feature Name Releases Feature Information
Webtype access lists 7.0(1) Webtype access lists are access lists that are added to a
configuration that supports filtering for clientless SSL
VPN.
We introduced the feature and the following command:
access-list webtype.
Unified ACL for IPv4 and IPv6 9.0(1) ACLs now support IPv4 and IPv6 addresses. You can even
specify a mix of IPv4 and IPv6 addresses for the source and
destination. The IPv6-specific ACLs are deprecated.
Existing IPv6 ACLs are migrated to extended ACLs. See the
release notes for more information about migration.
We modified the following commands: access-list
extended, access-list webtype.
We removed the following commands: ipv6 access-list,
ipv6 access-list webtype, ipv6-vpn-filter

Cisco ASA 5540 Specifications

General

Firewall Throughput	650 Mbps
Maximum Firewall Connections	400, 000
VPN Throughput	225 Mbps
Maximum VPN Peers	5, 000
High Availability	Active/Active, Active/Standby
IPSec VPN Throughput	225 Mbps
Memory	1 GB
IPS Throughput	225 Mbps
Security Contexts	50
Flash Memory	64 MB
Form Factor	1U
Power Supply	Dual
Interfaces	4 x 10/100/1000 Ethernet