Cisco ASA 5540 User Manual

1-12
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring RIP
Feature History for RIP
Feature History for RIP
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for RIP
Feature Name Releases Feature Information
RIP support 7.0(1) Support was added for routing data, performing
authentication, and redistributing and monitoring routing
information using the Routing Information Protocol (RIP).
We introduced the route rip command.
Clustering 9.0(1) For RIP, bulk synchronization, route synchronization, and
layer 2 load balancing are supported in the clustering
environment.
We introduced or modified the following commands: show
route cluster, debug route cluster, show mfib cluster,
debug mfib cluster.

Cisco ASA 5540 Specifications

General

Firewall Throughput	650 Mbps
Maximum Firewall Connections	400, 000
VPN Throughput	225 Mbps
Maximum VPN Peers	5, 000
High Availability	Active/Active, Active/Standby
IPSec VPN Throughput	225 Mbps
Memory	1 GB
IPS Throughput	225 Mbps
Security Contexts	50
Flash Memory	64 MB
Form Factor	1U
Power Supply	Dual
Interfaces	4 x 10/100/1000 Ethernet