Cisco cBR 8 Configuration Guide

CHAPTER 1
Dynamic Bandwidth Sharing
The Cisco cBR series router enables dynamic bandwidth sharing (DBS) on integrated cable (IC) and wideband
(WB) cable interfaces.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/. An account on http://
www.cisco.com/ is not required.
Contents
•
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 1
•
Information About Dynamic Bandwidth Sharing, page 2
•
How to Configure Dynamic Bandwidth Sharing, page 2
•
Verifying the Dynamic Bandwidth Sharing Configuration, page 4
•
Additional References, page 7
•
Feature Information for Dynamic Bandwidth Sharing, page 7
Hardware Compatibility Matrix for Cisco cBR Series Routers
The hardware components introduced in a given Cisco IOS-XE Release are supported in all subsequent
releases unless otherwise specified.
Note
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
1

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English