Cisco cBR 8 Configuration Guide

CHAPTER 2
Modular Quality of Service Command-Line
Interface QoS
This module contains the concepts about applying QoS features using the Modular Quality of Service (QoS)
Command-Line Interface (CLI) (MQC) and the tasks for configuring the MQC. The MQC allows you to
define a traffic class, create a traffic policy (policy map), and attach the traffic policy to an interface. The
traffic policy contains the QoS feature that will be applied to the traffic class.
•
Finding Feature Information, page 9
•
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 10
•
Restrictions for Applying QoS Features Using the MQC, page 10
•
About, page 11
•
How to Apply QoS Features Using the MQC, page 17
•
Configuration Examples for Applying QoS Features Using the MQC, page 21
•
How to Configure Input MQC on the Port-Channel Interfaces, page 25
•
Example: Configuring Input MQC on the Port-Channel Interfaces, page 27
•
Additional References, page 28
•
Feature Information for Modular Quality of Service Command-Line Interface QoS, page 28
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
9

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English