Cisco cBR 8 Configuration Guide

CHAPTER 5
DOCSIS WFQ Scheduler on the Cisco CMTS
Routers
The DOCSIS WFQ Scheduler is an output packet scheduler that provides output scheduling services on both
WAN uplink interfaces and DOCSIS downstream interfaces.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/. An account on http://
www.cisco.com/ is not required.
Contents
•
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 80
•
Prerequisites for DOCSIS WFQ Scheduler, page 80
•
Restrictions for DOCSIS WFQ Scheduler, page 80
•
Information About DOCSIS WFQ Scheduler, page 81
•
How to Configure DOCSIS WFQ Scheduler , page 86
•
Additional References, page 88
•
Feature Information for DOCSIS WFQ Scheduler, page 88
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
79

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English