Router(config-if)# channel-group 2
Router(config-if)# interface port-channel 2
Router(config-if)# service-policy input policy1
Device(config-if)# end
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All Releases
Cisco IOS commands
Cisco IOS Quality of Service Solutions Command
Reference
QoS commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
“Classifying Network Traffic” module
Packet classification
“FRF .20 Support” module
Frame Relay Fragmentation (FRF) PVCs
“IPv6 Selective Packet Discard” module
Selective Packet Discard
“Broadband Scalability and Performance” module of
the Cisco ASR 1000 Series Aggregation Services
Routers Software Configuration Guide.
Scaling and performance information
Technical Assistance
LinkDescription
http://www.cisco.com/cisco/web/support/index.html
The Cisco Support and Documentation website
provides online resources to download documentation,
software, and tools. Use these resources to install and
configure the software and to troubleshoot and resolve
technical issues with Cisco products and technologies.
Access to most tools on the Cisco Support and
Documentation website requires a Cisco.com user ID
and password.
Feature Information for Modular Quality of Service
Command-Line Interface QoS
Use Cisco Feature Navigator to find information about platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software release,
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE
Fuji 16.7.x
28
Modular Quality of Service Command-Line Interface QoS
Additional References
To Next Page
Loading...
Need help?
General
