no cdp run
snmp-server community public RW
snmp-server community private RW
snmp-server enable traps cable
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
exec-timeout 0 0
password my-telnet-password
login
length 0
!
end
Additional References
For additional information related to DOCSIS 1.1 operations, refer to the following references:
Technical Assistance
LinkDescription
http://www.cisco.com/cisco/web/support/index.html
The Cisco Support and Documentation website
provides online resources to download documentation,
software, and tools. Use these resources to install and
configure the software and to troubleshoot and resolve
technical issues with Cisco products and technologies.
Access to most tools on the Cisco Support and
Documentation website requires a Cisco.com user ID
and password.
Feature Information for DOCSIS 1.1 for Cisco CMTS Routers
Use Cisco Feature Navigator to find information about platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software release,
feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account
on Cisco.com is not required.
The table below lists only the software release that introduced support for a given feature in a given
software release train. Unless noted otherwise, subsequent releases of that software release train also
support that feature.
Note
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
71
DOCSIS 1.1 for the Cisco CMTS Routers
Additional References
To Next Page
Loading...
Need help?
General
